Purchase instructions
When choosing water tank, the depth should be considered first, and some imported flume is not suitable for domestic large pot, and the second is size. It is also necessary to avoid any moisture protection measures at the bottom, and pay attention to the following points.
① According to the cabinet table size determines the size of the sink, because the sink can be installed on the table, in the table, under the table, so the size of the choice is different.
② When selecting stainless steel sink, the material thickness should be moderate, too thin will affect the service life and strength of the sink, too thick and easy to damage the dishes washed. In addition, the flatness of stainless steel surface should be seen, such as uneven indicating poor quality.
③ Generally, the water tank with large cleaning volume is practical and the depth is about 20cm, so it can prevent splashing out of water.
④ The surface treatment of the water tank shall be beautiful and practical with matte surface. The welding place of the water tank shall be carefully observed, and the weld shall be flat and even without rust spots.
⑤ Beautiful shape, reasonable design, with overflow as a good.
Folding editing quality identification of this section
1. thickness of steel plate of water tank: imported 304 stainless steel plate is used for high-quality water tank, with thickness of 1mm, while 0.5mm-0.7mm is used for ordinary low-grade water tank. The method of discrimination can be distinguished from weight and surface flatness.
2. noise prevention treatment: the bottom of high-quality water tank is sprayed or rubber coated without falling off, which can reduce the noise caused by the impact of tap water on the bottom of the basin, and play a buffer role.
3. surface treatment: the surface of high-quality water tank is flat, and the visual luster is soft, and it is not easy to stick to oil, easy to clean and wear-resistant.
4. inner corner treatment: the high-quality tank inner corner is close to 90 degrees, the vision in the tank is larger and the basin volume is larger.
5. supporting parts: the high-quality falling head requires wall thickness, smooth treatment, no water leakage when the lifting cage is closed, and the bead touching is durable and comfortable. The downpipe is made of environmental protection disposable materials, which has the functions of easy installation, odor proof, heat resistance and aging resistance, and is durable.
6. forming process of water tank: integrated forming technology solves the leakage problem caused by the welding of basin which causes the weld to be unable to withstand corrosion of various chemical liquids (such as cleaning agent, stainless steel cleaner, etc.). Integrated forming process is a very important process, which requires high steel plate material. What kind of technology is adopted is a clear embodiment of the quality of the sink.
Executive standard: qb/t xxx-2008 domestic stainless steel sink
requirement:
1、 Appearance quality
(1) The welding shall be correct, and the surface texture after polishing shall be uniform and consistent, and there shall be no obvious scratch, hammer printing and burning mark.
(2) The welding parts of the water tank shall be firm, with uniform welding lines, without defects such as incomplete welding and cracks. The exposed welds shall be polished or color removed.
(3) The edge of the tank shall be smooth and free from sharp corners and burrs.
https://www.zberic.com/triple-bowl-stainless-steel-sink/
https://www.zberic.com/double-bowl-stainless-steel-sink/
Post time: Mar-22-2021